Figuring out what’s the best way to clean the carpets in your office or commercial space? Carpet steam cleaning in Melbourne can help you refresh and sanitise your carpets, removing any dirt, stains, and allergens in a jiffy.
Whether you’re tackling this task for the first time or looking to refine your technique, a quick guide is all you need to ensure your office carpets come out nice and clean. Here’s some simple steps to get started. Read along.
Arrange Your Office Space Well
Before you can get started with the process, it’s essential that you clear the room of all cabinets and objects to access every part of the carpet and prevent steam damage to any items. For furniture that’s too heavy to move, try placing aluminium foil under the legs to protect them. If moving everything is not feasible, clean one half of the space at a time.
Additionally, you can dust the baseboards and ceiling to prevent dust from falling onto your freshly cleaned carpet. With your office space prepped, you’re ready to move on to the next step.
Vacuum Inside Out to Treat Stains
Rigorously vacuuming the carpet is key to removing any dirt and debris so use a nozzle attachment to reach tight areas. These could be near the baseboards to loosen up dirt and better your steam cleaning procedure.
For old, stubborn stains, apply a pre-treatment formula. Some stains might require some attention, so refer to specialised guides on how you can remove such stains.
Prepare the Cleaning Solution
Now it’s time to fill your steam cleaner with some hot water and the necessary carpet cleaning liquid. Although your steam cleaner may have a built-in water heater, pouring in initially prepared hot water will make your cleaning more potent.
It’s vital that you read any user guidelines when using the solution since not every cleaning agent might be suitable for commercial carpet cleaning. As a natural alternative you can also make use of vinegar and mix it with water in an equal amount.
Start the Cleaning Process
With everything in place, it’s time to start the actual steam cleaning process. Start by pressing the trigger and releasing the cleaning liquid as you move the cleaner slowly over your carpet back and forth.
Upon finishing one pass, release the trigger again to make another pass. This time over the same area to extract any dirty water that’s has been left out. Continue slowly and allow the machine to remove any type of moisture. Try not to rush as this may leave some excess water in the carpet and lead to moulding.
Proceed Methodically Across the Carpet
Continue the carpet cleaning of your Melbourne office as you move your cleaner systematically across the carpet and work backward out of the room to avoid stepping over any cleaned areas. Refill the dirty tank with clean water as and when necessary and as indicated by your machine.
Allow the Carpet to Dry Completely
Drying time for carpets after steam cleaning varies and can take anywhere from 6 to 8 hours, and sometimes even 24 hours. To speed up, set your thermostat to heat the room and use a floor fan to circulate air. If you need to walk over your newly cleaned carpet before it’s dry, ensure you do so by covering your feet with plastic bags to avoid any dirt.
Final Thoughts
Great! Now that you know how to start steam cleaning your carpets, ensure you do it with caution and care. Regular steam cleaning will not only extend the life of your carpets but also maintain a healthy indoor environment by eliminating any allergens and bacteria.
Follow these steps to ensure your carpets are thoroughly cleaned and sanitised. Or, for more professional help, contact us at Keen to Clean for commercial carpet cleaning in Melbourne and we’ll make them as good as new. Connect now!
